CANON®
BJC-600, BJC-600e, BJC-610, BJC-620
APPLE® Colour Stylewriter
Pro
( BJI-201 type
cartridge )
1. Turn the cartridge upside down,
and using a pointed instrument push
in the ball bearing which seals the filling
hole.
Note: Some cartridges have the
filling hole on the top surface under the
label or it might be necessary to make a small hole for the needle
to penetrate. After filling, seal hole with scotch tape.
2. Assemble the syringe
and filling needle and fill with
the correct colour ink.
3. Slowly inject ink, up to 4 ml., into
the filling hole until the chamber is almost full. Unused ink may be returned
to the bottle.
4. Seal the filling hole with the plug provided,
ensuring that the plug is pushed
firmly home.
5. Clean the syringe with water and dry
for future use, or use with a
different colour ink.
6. Replace the cartridge and run a priming
cycle as per printer instructions.
|
