|
HEWLETT PACKARD®
710C, 712C, 720C, 722C, 820Cse, 820Cxi, 850C, 855C, 855Cse, 855Cxi,
870Cse, 870Cxi, 890C, 890Cse, 890Cxi, 895Cse, 895Cxi,
1000, 1000Cse, 1000Cxi,1100C, 1100Cse, 1100Cxi, 1120C, 1120Cse, 1120Cxi,
1200Cps, 1200C, 1600C, 1600CM, 1600CN, 1600C
( HP 51645A, 51640A, 51650
)
1. Turn the cartridge upside down.
Using a pointed instrument push through the plastic film
and push in the ball bearing which seals
the filling hole.
2. Assemble the syringe and filling needle and
fill with the correct colour ink.
3. Slowly inject up to 20ml. of ink into the filling
hole. Unused ink may be returned
to the bottle.
4. Seal the filling hole by squeezing the cartridge
sides firmly and inserting the plug provided, ensuring
that the plug is pushed firmly home.
( Ink will leak from the
print head ).
5. Stand cartridge, print head down,
on absorbent paper for 2 minutes to draw out any
excess ink and equalize pressure in the
ink chamber.
6. Clean the syringe with water and
dry for future use, or use with
a different colour ink.
7. Replace the cartridge and run a priming
cycle as per printer instructions.
Note: Empty
cartridges should be refilled
immediately.
|
|
