|
HEWLETT PACKARD®
DESK JET 710C, 712C, 720C, 722C,
820Cse, 820Cxi, 850C, 855C, 855Cse, 855Cxi, 870Cse, 870Cxi, 890C,
890Cse, 890Cxi, 895Cse, 895Cxi, 1000, 1000Cse, 1000Cxi, 1100C, 1100Cse,
1100Cxi, 1120C, 1120Cse, 1120 Cxi
( HP 51641A, C1823A
)
1. The filling holes are located on
top of the cartridge and are sealed
with small plastic plugs. These
must be removed by pushing them into the cartridge using
a pointed instrument ( e.g. a ball point pen tip ).
2. Assemble the syringe and
filling needle and fill with
the correct colour ink.
3. Insert the filling needle into the filler
hole of the colour to be refilled, (see diagram
above) and push downwards into the centre of the cartridge.
Note: The cartridge contains sponge
and a slight resistance may
be felt.
4. Slowly inject ink until the sponge is
saturated. Do not reseal the filling holes.
5. Clean the syringe with water, and dry before
refilling with another colour.
Note: Empty cartridges should be refilled
immediately.
|
|
